Code of Federal Regu... > 49 CFR Department of... > B Other Regulations ... > I Pipeline and Hazar... > C Hazardous Material... > 178 Specifications F...

Login required to View Regulations

Sign In or Register Now. Registration is fast and free!

Subpart J — Specifications for Containers for Motor Vehicle Transportation

§178.318 — Specification MC 201; container for detonators and percussion caps

§178.318-1 — Scope

§178.318-2 — Container

§178.318-3 — Marking

§178.320 — General requirements applicable to all DOT specification cargo tank motor vehicles

§178.337 — Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter

§178.337-1 — General requirements

§178.337-2 — Material

§178.337-3 — Structural integrity

§178.337-4 — Joints

§178.337-5 — Bulkheads, baffles and ring stiffeners

§178.337-6 — Closure for manhole

§178.337-7 — Overturn protection

§178.337-8 — Openings, inlets, and outlets

§178.337-9 — Pressure relief devices, piping, valves, hoses, and fittings

§178.337-10 — Accident damage protection

§178.337-11 — Emergency discharge control

§178.337-12 — [Reserved]

§178.337-13 — Supporting and anchoring

§178.337-14 — Gauging devices

§178.337-15 — Pumps and compressors

§178.337-16 — Testing

§178.337-17 — Marking

§178.337-18 — Certification

§178.338 — Specification MC-338; insulated cargo tank motor vehicle

§178.338-1 — General requirements

§178.338-2 — Material

§178.338-3 — Structural integrity

§178.338-4 — Joints

§178.338-5 — Stiffening rings

§178.338-6 — Manholes

§178.338-7 — Openings

§178.338-8 — Pressure relief devices, piping, valves, and fittings

§178.338-9 — Holding time

§178.338-10 — Accident damage protection

§178.338-11 — Discharge control devices

§178.338-12 — Shear section

§178.338-13 — Supporting and anchoring

§178.338-14 — Gauging devices

§178.338-15 — Cleanliness

§178.338-16 — Inspection and testing

§178.338-17 — Pumps and compressors

§178.338-18 — Marking

§178.338-19 — Certification

§§178.340-178.343 [Reserved]

§178.345 — General design and construction requirements applicable to Specification DOT 406 (§178.346), DOT 407 (§178.347), and DOT 412 (§178.348) cargo tank motor vehicles

§178.345-1 — General requirements

§178.345-2 — Material and material thickness

§178.345-3 — Structural integrity

§178.345-4 — Joints

§178.345-5 — Manhole assemblies

§178.345-6 — Supports and anchoring

§178.345-7 — Circumferential reinforcements

§178.345-8 — Accident damage protection

§178.345-9 — Pumps, piping, hoses and connections

§178.345-10 — Pressure relief

§178.345-11 — Tank outlets

§178.345-12 — Gauging devices

§178.345-13 — Pressure and leakage tests

§178.345-14 — Marking

§178.345-15 — Certification

§178.346 — Specification DOT 406; cargo tank motor vehicle

§178.346-1 — General requirements

§178.346-2 — Material and thickness of material

§178.346-3 — Pressure relief

§178.346-4 — Outlets

§178.346-5 — Pressure and leakage tests

§178.347 — Specification DOT 407; cargo tank motor vehicle

§178.347-1 — General requirements

§178.347-2 — Material and thickness of material

§178.347-3 — Manhole assemblies

§178.347-4 — Pressure relief

§178.347-5 — Pressure and leakage test

§178.348 — Specification DOT 412; cargo tank motor vehicle

§178.348-1 — General requirements

§178.348-2 — Material and thickness of material

§178.348-3 — Pumps, piping, hoses and connections

§178.348-4 — Pressure relief

§178.348-5 — Pressure and leakage test

Source: 29 FR 18975, Dec. 29, 1964, unless otherwise noted. Redesignated at 32 FR 5606, Apr. 5, 1967.